Welcome to the Samsung Galaxy Forum.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Results 1 to 1 of 1
  1. #1
    Join Date
    Mar 2020
    united states
    Member #
    0 times

    HP Deskjet 3760 All-in-one Printer?

    1.Unpack the printer

    Take HP Deskjet 3760 printer out of the box after removing the tape and any
    other packing material on the box.
    Place your 123HP printer on a sturdy surface. Carefully take off all the
    packing material and tape from outside and inside the printer.
    Make sure that your printer box has all the hardware
    printer materials. You can refer the manual or item list.
    Remove the packaging tape from the media tray space and from the scanner
    space also.

    2.Connect the power cord

    Take out the power cable from the box and connect it to the printer and AC outlet.
    Take the one end of power cable to the rear of printer another end of the power cable connected to the AC outlet
    Now press the power button and switch on the 123hp Deskjet 3760 printer.
    Youíll be prompted to select the preferences. Select country/region and time/date from the control panel.
    Scroll the control panel screen and confirm the preference selection by clicking OK.

    3.Ink installation on HP 3760 Printer

    Complete the HP Deskjet 3760 printer setup and then move forward to the ink cartridge procedure.
    Open the ink cartridge access door so that the cartridge shifts the center of the printer.
    Take the ink cartridge out of its packing. Hold the ink cartridge from the black plastic area only.
    Install the black ink cartridge in the right and the tri-color ink cartridge in the left ink slot.
    Lock the ink cartridges in their slots properly by pushing them into the slot area.
    Once Completion of installation visit, for Downloading 123 HP Setup

    4.Load the paper

    Once you done with installing the cartridges, draw out the paper input tray.
    After extending the input tray outward, draw the tray extender and make the paper catch raise up.
    Now move the paper width guides outward to their extreme positions.
    Place the media stack into the paper input tray and slide it inside until it halts. Arrange the paper width guides along the media stack limit.
    Push the paper input tray back into the 123 printer until it fits into the place.

  2. Ads



Remove Ads


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Similar Threads

  1. Take Brother Printer Support To Deal With Printerís Driver Related Problems
    By peterdsus in forum Galaxy S2 General Discussions
    Replies: 0
    Last Post: 12-03-2019, 06:52 AM
  2. Replies: 0
    Last Post: 08-29-2019, 05:08 AM
Back to Top