Firmware upgrade encountered an issue.

[Ollie]

If it fails try flashing it again. Also, try rebooting your PC and using another USB port.

[Ads]

[MAC]

If it fails try flashing it again. Also, try rebooting your PC and using another USB port.

Tried both rebooting the pc and changed the USB port. Still the same result. Thanks

[Ollie]

Ok. Redownload this: Hotfile.com: One click file hosting: I727UCLF6_I727ATTLF6_ATT.zip and unzip it once. Flash it in the PDA slot of Odin. If your phone is booting you should first perform a factory data reset on it before and directly after the phone boots for the first time on ICS. Let it idle for a minute then do the second wipe.

[MAC]

Ok. Redownload this: Hotfile.com: One click file hosting: I727UCLF6_I727ATTLF6_ATT.zip and unzip it once. Flash it in the PDA slot of Odin. If your phone is booting you should first perform a factory data reset on it before and directly after the phone boots for the first time on ICS. Let it idle for a minute then do the second wipe.

Did the above steps, It is still stuck on (<ID:0/003> SetupConnection..) as shown below for the last 15 minutes. BTW this is the same behavior as previous tries. is this normal, i would expect more debugging outputs. thanks

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I727UCLF6_I727ATTLF6_I727UCLF6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..

[Ollie]

Do you have Kies installed on your computer?

While plugging your phone in after putting it into download mode, did it install any drivers?

Are you running Odin as administrator?

Sent from my GT-I9300 using Tapatalk 2

[MAC]

I installed the latest version of Kies, it did download some drivers. I gave up on Kies as it was timing out while trying to do the update. I tried Kies for about 10 times with the same timeout issue. Yes I am running Odin as an administrator, anyway my user account has admin rights. Thanks for any help.

[Ollie]

Have you checked to make sure nothing Kies related is running in your task manager?

You are welcome!

Sent from my GT-I9300 using Tapatalk 2

[j00p]

Hi Ollie,

I'm pretty new to this and I've followed all the steps but get the following;

<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> recovery.img
<ID:0/016> NAND Write Start!!
<ID:0/016>
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I'm from the UK on the t-mobile network and have the Samsung Galaxy S2 GT-i9100

[Rickoza]

Hi, new here! Tried to do the flash upgrade of ICS this morning and received errors same as the poster immediately above but got "Firmware Upgrade encountered an issue. Please select recovery mode in Kies and try again". When plugging in the phone an attempting to connect to Kies it simply times out. Only had this phone a month, am on Orange. I have a Samsung Galaxy 2 GT-I8160.

[scottm5443]

I have the same problem. Screen on phone has
ODIN MODE
Product name SGH-I727
Custom Binary download no
Current binary Samsung official

Firmware upgrade encounted an issue. Please select recover mode in Kies & try again.

In Odin3 V1.85 I get the yellow 0:[com6]
I put the correct version in PDA hit start and wait for hours and never get past this
<ID:0/006> Added!!

<OSM> Enter CS for MD5..

<OSM> Check MD5.. Do not unplug the cable..

<OSM> Please wait..

<OSM> I727UCLF6_I727ATTLF6_I727UCLF6_HOME.tar.md5 is valid.

<OSM> Checking MD5 finished Sucessfully..

<OSM> Leave CS..

<ID:0/006> Odin v.3 engine (ID:6)..

<ID:0/006> File analysis..

<ID:0/006> SetupConnection..

<ID:0/006> Initialzation..

<ID:0/006> Get PIT for mapping..

<ID:0/006> Firmware update start..

<ID:0/006> boot.img

<ID:0/006> NAND Write Start!!

<ID:0/006> recovery.img

Forgot ATT in the USA