Register

Welcome to the Samsung Galaxy Forum.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Results 1 to 1 of 1
  1. #1
    Junior Member
    Join Date
    Jun 2020
    Location
    India
    Posts
    3
    Member #
    31006
    Liked
    0 times

    Advance Technology Used In Manufacturing Sector

    Plywood Manufacturers
    On arrival at the mill, logs are stored in the Log Yard. Mills will use various methods to retain the moisture in the logs, many opting for sprinkler systems.


    Logs will then eventually make their way to the Log Pond. Logs are submerged in water for an extended period of time so that they are easier to cut down to size and easier to peel. Some mills in colder climates have heated log ponds as the heat also improves the quality of the peeling; they refer to this as hydro-thermal processing.


    Following peeling, the veneers are moved along the production line in long streams. They need to be cut to size and go through an initial grading process. Grading is especially important in regards to Birch Plywood so the majority of mills use scanning technology to check for defects in the veneers, cutting to the required sizes and then separating potential face veneers from core veneers.


    Aroha Plywood is a big market in the plywood manufacturers in Yamunanagar industry. It deals with various kinds of services like Marine Ply, Block Boards, and Flush Doors. For more information visit our website and call on the given number.


    * Aroha Rigid Marine Ply


    * Aroha Shuttering Plywood


    * Aroha Blockboard


    * Aroha Film Faced Ply

  2. Ads


 

 

Remove Ads

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Blockchain Technology in Manufacturing Industry
    By Dynamo King in forum New Member Introduction & Site Assistance
    Replies: 0
    Last Post: 05-04-2020, 12:57 AM
  2. d a great opportunity to advance to the Stanley
    By sakura698 in forum New Member Introduction & Site Assistance
    Replies: 0
    Last Post: 12-16-2019, 06:28 PM
  3. 4, 6-4 to advance to third round. Her best result at
    By sakura698 in forum New Member Introduction & Site Assistance
    Replies: 0
    Last Post: 11-08-2019, 06:03 PM
  4. es and broke Bencic five times to advance in less than an
    By sakura698 in forum New Member Introduction & Site Assistance
    Replies: 0
    Last Post: 11-05-2019, 06:26 PM
Back to Top